Shop By Category
- Wilwood Forged Narrow Superlite 6R Front Brake Kit, 12" Rotors, 6 Lug - 140-15944
Wilwood Forged Narrow Superlite 6R Front Brake Kit
6 Lug
12" 1 Piece Rotor and Hats, SRP Drilled & Slotted Available
6 Piston Calipers, Red or Black Available
15" Minimum Wheel Diameter* FOR USE WITH WILWOOD C10 STEEL SPINDLES
Learn MoreAs low as $1,321.61
- Wilwood Forged Narrow Superlite 6R Front Brake Kit, 12" Rotors - 140-15940
Wilwood Forged Narrow Superlite 6R Front Brake Kit
12" 1 Piece Rotor and Hats, SRP Drilled & Slotted Available
6 Piston Calipers, Red or Black Available
15" Minimum Wheel Diameter* FOR USE WITH WILWOOD C10 STEEL SPINDLES
Learn MoreAs low as $1,283.30
- Wilwood Forged Narrow Superlite 6R Front Brake Kit, 13" Rotors, 6 Lug - 140-15945
Wilwood Forged Narrow Superlite 6R Front Brake Kit
6 Lug
13" Rotors, SRP Drilled & Slotted Available
6 Piston Calipers, Red or Black Available
17" Minimum Wheel Diameter* FOR USE WITH WILWOOD C10 STEEL SPINDLES
Learn MoreAs low as $2,148.74
- Wilwood Forged Narrow Superlite 6R Front Brake Kit, 14" Rotors, 6 Lug - 140-15946
Wilwood Forged Narrow Superlite 6R Front Brake Kit
6 Lug
14" Rotors, SRP Drilled & Slotted Available
6 Piston Calipers, Red or Black Available
18" Minimum Wheel Diameter* FOR USE WITH WILWOOD C10 STEEL SPINDLES
Learn MoreAs low as $2,295.68
- Wilwood Forged Narrow Superlite 6R Front Brake Kit, 13" Rotors - 140-15941
Wilwood Forged Narrow Superlite 6R Front Brake Kit
13" Rotors, SRP Drilled & Slotted Available
6 Piston Calipers, Red or Black Available
17" Minimum Wheel Diameter* FOR USE WITH WILWOOD C10 STEEL SPINDLES
Learn MoreAs low as $2,080.49
- Wilwood Forged Narrow Superlite 6R Front Brake Kit, 14" Rotors - 140-15942
Wilwood Forged Narrow Superlite 6R Front Brake Kit
14" Rotors, SRP Drilled & Slotted Available
6 Piston Calipers, Red or Black Available
18" Minimum Wheel Diameter* FOR USE WITH WILWOOD C10 STEEL SPINDLES
Learn MoreAs low as $2,252.36
- Wilwood Forged Narrow Superlite 6R Front Brake Kit, 14" Rotors - 140-15304
Wilwood Forged Narrow Superlite 6R Front Brake Kit
14" Rotors, SRP Drilled & Slotted Available
6 Piston Calipers, Red or Black Available
18" Minimum Wheel Diameter* FOR USE WITH WILWOOD C10 PRO SPINDLES
Learn MoreAs low as $2,118.49
- Wilwood Forged Narrow Superlite 6R Front Brake Kit, 13" Rotors - 140-15303
Wilwood Forged Narrow Superlite 6R Front Brake Kit
13.06" Rotors, SRP Drilled & Slotted Available
6 Piston Calipers, Red or Black Available
17" Minimum Wheel Diameter* FOR USE WITH WILWOOD C10 PRO SPINDLES
Learn MoreAs low as $1,959.74
- Wilwood Forged Narrow Superlite 4R Rear Big Brake Kit, 12.88" Rotors - 140-9219Wilwood Forged Narrow Superlite 4R Rear Big Brake Kit
12.88" Rotors, SRP Drilled & Slotted Available
4 Piston Calipers, Red or Black Available
Big Ford New Style Rear End Axle Flange (Torino), 2.50 Offset
17" Minimum Wheel Diameter Learn MoreAs low as $1,947.24
- Wilwood Forged Narrow Superlite 6R Front Brake Kit, 12" Rotors - 140-15302
Wilwood Forged Narrow Superlite 6R Front Brake Kit
12.19" Rotors, SRP Drilled & Slotted Available
6 Piston Calipers, Red or Black Available
15" Minimum Wheel Diameter* FOR USE WITH WILWOOD C10 PRO SPINDLES
Learn MoreAs low as $1,089.49
- Wilwood Forged Narrow Superlite 6R Front Brake Kit, 13" Rotors, 6 Lug - 140-16457
Wilwood Forged Narrow Superlite 6R Front Brake Kit
6 Lug
13.06" Rotors, Drilled & Slotted Available
6 Piston Calipers, Red or Black Available
17" Minimum Wheel Diameter* FOR USE WITH CPP MODULAR SPINDLES
Learn MoreAs low as $2,148.74
- Wilwood Forged Dynalite Rear Brake Kit, 12.19" Rotors, 6 Lug - 140-16712Wilwood Forged Dynalite Rear Parking Brake Kit
12.19" Rotors, SRP Drilled & Slotted Available
4 Piston Calipers, Red or Black Available
Large Chevy C10 Rear End Axle, 2.46 Offset
15" Minimum Wheel Diameter Learn MoreAs low as $1,090.11
- Wilwood Forged Narrow Superlite 6R Front Brake Kit, 14" Rotors, 6 Lug - 140-16458
Wilwood Forged Narrow Superlite 6R Front Brake Kit
6 Lug
14" Rotors, Drilled & Slotted Available
6 Piston Calipers, Red or Black Available
18" Minimum Wheel Diameter* FOR USE WITH CPP MODULAR SPINDLES
Learn MoreAs low as $2,295.68
- Wilwood Forged Dynapro Rear Brake Kit, 11" Rotors, 6 Lug - 140-16711Wilwood Forged Dynapro Low-Profile Rear Brake Kit
6 Lug
11" Rotors, SRP Drilled & Slotted Available
4 Piston Calipers, Red or Black Available
Large Chevy C10 Rear End Axle, 2.46 Offset
14" Minimum Wheel Diameter Learn MoreAs low as $1,092.61
- Wilwood Forged Narrow Superlite 6R Front Brake Kit, 13" Rotors - 140-10775
Wilwood Forged Narrow Superlite 6R Front Brake Kit
13.06" Rotors, Drilled & Slotted Available
6 Piston Calipers, Red or Black Available
17" Minimum Wheel Diameter* FOR USE WITH CPP MODULAR SPINDLES
Learn MoreAs low as $2,080.49
- Wilwood D154 Rear Brake Kit, 12.19" Rotors - 140-12569Wilwood D154 Rear Brake Kit
12.19" Rotors, SRP Drilled & Slotted Available
2 Piston Calipers, Red or Black Available
Large Chevy C10 Rear End Axle, 2,42 Offset
16" Minimum Wheel Diameter
Learn MoreAs low as $897.68
- Wilwood Forged Dynapro Rear Brake Kit, 11" Rotors - 140-11385Wilwood Forged Dynapro Low-Profile Rear Brake Kit
11" Rotors, SRP Drilled & Slotted Available
4 Piston Calipers, Red or Black Available
Large Chevy C10 Rear End Axle, 2,42 Offset
14" Minimum Wheel Diameter Learn MoreAs low as $978.86
- Wilwood Forged Dynalite Rear Brake Kit, 12.19" Rotors - 140-10094Wilwood Forged Dynalite Rear Brake Kit
12.19" Rotors, SRP Drilled & Slotted Available
4 Piston Calipers, Red or Black Available
Large Chevy C10 Rear End Axle, 2,42 Offset
15" Minimum Wheel Diameter Learn MoreAs low as $978.86
- Wilwood Forged Narrow Superlite 4R Rear Brake Kit, 12.88" Rotors - 140-10093Wilwood Forged Narrow Superlite 4R Rear Brake Kit
12.88" Rotors, SRP Drilled & Slotted Available
4 Piston Calipers, Red or Black Available
Large Chevy C10 Rear End Axle, 2,42 Offset
17" Minimum Wheel Diameter Learn MoreAs low as $1,947.24
- Porterbuilt 1967-72 Hood Hinges
The Porterbuilt cowl mounted hood hinges are the perfect solution to relocating the hood hinges once the factory inner fender wells have been removed.
Learn More$425.00
- Porterbuilt 1963-72 Fully Adjustable Trac-bar Kit
If you are thinking about lowering your C10 truck more than four inches in the rear, a longer trac-bar will be a necessity! The Porterbuilt Fully Adjustable Trac-bar has an overall length of just over 34 inches. The longer the bar, the less side to side shift the differential will experience through suspension travel. The new mounting brackets also relocate the bar lowering the rear roll-center, and the bar length can be tuned while still mounted on the truck!
Learn More$299.00
- Ridetech HQ Shock 22169841- 5.7'' Stroke - Eye Mount
DROPMEMBER COMPATIBLE
The HQ (handling quality) Series shocks adds rebound adjustment for the driver who wants to tune ride quality AND handling quality to their specific taste. A wide rebound adjustment range allows you to cruise down the road in plush comfort or firm up your suspension for those Saturday morning canyon roads!
Learn More
Designed to replace OEM Shock Absorbers. Sold Individually$255.00
-
- Ridetech 1963-72 Chevy C10 TQ Series CoiloversRidetech TQ Series coilovers for the 1963-72 Chevy C10 Trucks
Sold in pairs.
Includes springs. Learn More$1,800.00
- Porterbuilt 1963-72 C10 Front Dropmember - Level 3 Extreme
The 1963-72 Chevy Pickup Front Dropmember suspension system is designed to replace the factory cross-member and steering system. It is engineered as a modular bolt-in unit that requires no welding.
When combined with a 2.5” drop spindle, 29” tall tire, and Porterbuilt Tubular Control Arms, the Level 3 Front will set the lowest point of the factory frame rails on the ground when fully deflated.Ride Height - 4"
Deflated Height - Lay Frame
Learn More$1,399.00
- Porterbuilt Air Management BracketsFrame mounted brackets that hold one compressor and 3 gallon tank.
Includes 2 brackets.
Tanks & compressors not included. Learn Morewas $199.00 Special Price $189.00
- Porterbuilt 1963-87 Transmission CrossmemberPorterbuilt tubular transmission crossmember for 1963-87 Chevy trucks. Learn More$119.00
- Porterbuilt Front Swaybar - Version 7 DropmemberPorterbuilt front swaybar for 1963-87 Version 7 Dropmember equipped trucks.
Fits Level 2 Coilover and Level 3 airbag kits only!
DOES NOT FIT LEVEL 1 DROPMEMBER KITS! Learn More$349.00
- Dropmember Steering Linkage Kit, 3 Joints Plus Support Bracket
This 3 joint steering linkage kit from Unisteer includes everything you need for your Dropmember equipped truck.
Learn More$380.00
- Porterbuilt Raised Bed Floor Mounts - 1963-72Raised Bed Floor Mounts for 1963-72 Dropmember Equipped Trucks
NOW INCLUDES MOUNTING BRACKETS FOR BOYD FUEL TANK Learn More$649.00
- Porterbuilt Battery Box, Driver SideBattery Box for Optima Yellow Top
Driver Side Learn More$169.00
- Porterbuilt Battery Box, Passenger SideBattery Box for Optima Yellow Top
Passenger Side Learn More$169.00
- Porterbuilt 1963-72 Rear Frame Crossmember, Tubular
Tubular rear frame crossmember built using thick-wall 1.5" tubing & 3/16" steel.
Fits: 1963-72 Chevy Trucks
Learn More$119.00
-
- Porterbuilt 1963-72 C10 Front Dropmember - Level 1 Mild, Airbag
The 1963-72 Chevy Pickup Front Dropmember suspension system is designed to replace the factory cross-member and steering system. It is engineered as a modular bolt-in unit that requires no welding.
When combined with a 2.5” drop spindle, 29” tall tire, and Porterbuilt Tubular Control Arms, the Level 1 Front will set the lowest point of the factory frame rails approximately 3" off of the ground when fully deflated.Ride Height - 6-7"
Deflated Height - 3"
Learn More$1,399.00
- Porterbuilt 1963-72 C10 Front Dropmember - Level 2 Touring, Coilover
The 1963-72 Chevy Pickup Front Dropmember suspension system is designed to replace the factory cross-member and steering system. It is engineered as a modular bolt-in unit that requires no welding.
When combined with a 2.5” drop spindle, 29” tall tire, and Porterbuilt Tubular Control Arms, the Level 2 Front will set the bottom of the cab approximately 5-6" off of the ground at ride height.Ride Height - 5-6"
Learn More$1,399.00
- Porterbuilt 1963-72 C10 Front Dropmember - Level 1 Mild, Coilover
The 1963-72 Chevy Pickup Front Dropmember suspension system is designed to replace the factory cross-member and steering system. It is engineered as a modular bolt-in unit that requires no welding.
When combined with a 2.5” drop spindle, 29” tall tire, and Porterbuilt Tubular Control Arms, the Level 1 Front will set the bottom of the cab approximately 7-8" off of the ground at ride height.Ride Height - 7-8"
Learn More$1,399.00
- PB Fab 1963-72 Boxed Trailing Arm Crossmember, 2 Piece Driveshaft
Replace your factory trailing crossmember with this fabricated version from Porterbuilt with added ground clearance.
Designed for a 2 piece driveshaft.
Learn More$349.00
- PB Fab 1963-72 Trailing Arm Crossmember, 2 Piece Driveshaft
Tubular trailing arm crossmember built using thick-wall 1.5" tubing & 3/16" steel.
Learn More$349.00
- PB Fab 1963-66 C10 Core Support Crossmember
Tubular core support crossmember built using thick-wall 1.5" tubing & 3/16" steel.
Learn More$119.00
- PB Fab 1967-72 C10 Core Support Crossmember
Tubular core support crossmember built using thick-wall 1.5" tubing & 3/16" steel.
Learn More$119.00
- Porterbuilt 1963-72 C10 Front Dropmember - Level 2 Touring, Coilover
The 1963-72 Chevy Pickup Front Dropmember suspension system is designed to replace the factory cross-member and steering system. It is engineered as a modular bolt-in unit that requires no welding.
When combined with a 2.5” drop spindle, 29” tall tire, and Porterbuilt Tubular Control Arms, the Level 2 Front will set the bottom of the cab approximately 5-6" off of the ground at ride height.Ride Height - 5-6"
Learn More$1,399.00
- Porterbuilt SBC Motor Mounts, Dropmember Version 7Porterbuilt Fabrication Version 7 Dropmember SBC Motor Mounts
Available in SBC, BBC, LS, & LT Configurations Learn More$249.00
- Porterbuilt BBC Motor Mounts, Dropmember Version 7Porterbuilt Fabrication Version 7 Dropmember BBC Motor Mounts
Available in SBC, BBC, LS, & LT Configurations Learn More$249.00
- Porterbuilt LT Motor Mounts, Dropmember Version 7Porterbuilt Fabrication Version 7 Dropmember LT Motor Mounts
Available in SBC, BBC, LS, & LT Configurations Learn More$249.00
- Porterbuilt Front Swaybar - 63-72 C10 Factory CrossmemberPorterbuilt front swaybar for 1963-72 C10 Trucks running PB arms and a factory crossmember.
Learn More$349.00
- Low Profile LSX Swap Oil Pan Kit, F-BodyLow Profile Oil Pan Kit
LSX Engine, F-Body Oil Pan
Fits 4.8L, 5.3L, 6.0L, 6.2L
Dropmember Compatible
Learn Morewas $349.00 Special Price $329.00
- Low Profile LT Swap Oil Pan KitLow Profile LT Oil Pan Kit
LT GEN V, A BODY, G BODY
Fits LT1, LT4, L83, L86, 5.3L, 6.2L
Dropmember Compatible Learn Morewas $379.00 Special Price $359.00
- Porterbuilt 1963-72 C10 Rear Dropmember - Level 1 Mild, Airbag
The Dropmember Rear modular suspension system is designed to replace the factory components and improve ride quality, performance, aesthetics, and strength.
DOES NOT REQUIRE ANY BED FLOOR MODIFICATION!
Ride Height - 7"
Learn More
Deflated Height - 3"$2,399.00
- Porterbuilt 1963-72 C10 Rear Dropmember - Level 3 Extreme, Airbag
The Dropmember Rear modular suspension system is designed to replace the factory components and improve ride quality, performance, aesthetics, and strength.
Ride Height - 4"
Learn More
Deflated Height - Lay Frame$2,399.00
- Porterbuilt 1963-72 C10 Rear Dropmember - Level 1 Coilover
The Dropmember Rear modular suspension system is designed to replace the factory components and improve ride quality, performance, aesthetics, and strength.
DOES NOT REQUIRE ANY BED FLOOR MODIFICATION!
Ride Height - 7"
Learn More$2,399.00
- Porterbuilt 1963-72 C10 Rear Dropmember - Level 2 Coilover
The Dropmember Rear modular suspension system is designed to replace the factory components and improve ride quality, performance, aesthetics, and strength.
Ride Height - 5-6"
Learn More$2,399.00
- Porterbuilt 1" Narrowed Control Arms - Version 7 Dropmember, Airbag
Porterbuilt tubular control arms are built using thick-wall DOM tubing and CNC cut 3/16 pickeled plate steel. All bushing pivot tubes and ball joint cups are TIG welded.
Learn More
1" NARROWED
FOR VERSION 7 DROPMEMBER ONLY$1,099.00
- Porterbuilt 1" Narrowed Control Arms - Version 7 Dropmember, Coilover
Porterbuilt tubular control arms are built using thick-wall DOM tubing and CNC cut 3/16 pickeled plate steel. All bushing pivot tubes and ball joint cups are TIG welded.
Learn More
1" NARROWED
FOR VERSION 7 DROPMEMBER ONLY$1,099.00